Shanghai Jieteng Precision Mold Factory
Shanghai Jingteng Metal Group Co., Ltd.
with medium strength, high plasticity when cold deformation, good low temperature performance, higher hardenability than corresponding carbon content's carbon steel. generally used for small section parts, and equal to 20Cr steel, can be used for carburized pinion, small shaft, steel sleeve, piston pin, diesel engine sleeve, car steering roller shaft, valve push rod, etc. also can be used for hardened and tempered steel, such as cold heading bolt or a large section of quenched and tempered parts.
C | Si | Mn | S | P | Cr | Ni | Cu |
0.19~0.25 | 0.17~0.37 | 1.35~1.65 | Below 0.050 |
Below 0.040 |
Below 0.30 | Below 0.30 | Below 0.30 |
Tensile strength σb (MPa) |
Yield Strength σs 0.2 (MPa) |
Elongation
δ 5 (%) |
reduction of crosssection area ψ (%) |
ballistic work Akv (J) |
pounding toughness value αkv (J/cm2) |
Hardness
(HB)
|
specimen size |
Above 785 | Above 590 | Above 10 |
Above 40 |
Above 47 |
Above 59 |
Below 187 | 15mm |
Copyright&Copy; 2002-2015 China JT Metal Group( Shanghai Jieteng Precision Mold Factory / Shanghai Jingteng Metal Group Co., Ltd. ). All Rights Reserved.
| Email: sales@sh-jieteng.com |
Old factory site: No.228 Sifeng Road, Songjiang district. Shanghai