Shanghai Jieteng Precision Mold Factory
Shanghai Jingteng Metal Group Co., Ltd.
High strength, plasticity and wear resistance, but cold deformation plasticity is not high and poor weldability. used as hardened and tempered parts works under heavy load, such as shaft, axle shaft, crankshaft, axle, screw, worm, piston rod, joystick, lever, connecting rod, loads of bolts, screw, the reinforcing ring, spring and so on, when used as diameter of 40mm in the following small section important parts, it's equal to 40Cr steel.
C | Si | Mn | S | P | Cr | Ni | Cu |
Mo |
0.38~0.43 | 0.15~0.35 | 1.60~1.90 | Below 0.040 |
Below 0.035 |
Below 0.30 | Below 0.030 | Below 0.30 | Below 0.30 |
Tensile strength σb (MPa) |
Yield Strength σs 0.2 (MPa) |
Elongation
δ 5 (%) |
reduction of crosssection area ψ (%) |
ballistic work Akv (J) |
pounding toughness value αkv (J/cm2) |
Hardness
(HB)
|
specimen size |
Above 885 | Above 735 | Above 12 |
Above 45 |
Above 55 |
Above 69 |
Below 217 | 25mm |
Copyright&Copy; 2002-2015 China JT Metal Group( Shanghai Jieteng Precision Mold Factory / Shanghai Jingteng Metal Group Co., Ltd. ). All Rights Reserved.
| Email: sales@sh-jieteng.com |
Old factory site: No.228 Sifeng Road, Songjiang district. Shanghai