Shanghai Jieteng Precision Mold Factory
Shanghai Jingteng Metal Group Co., Ltd.
The machinability is good after normalizing, hardening and tempering, good hardenability, cold deformation plasticity is low, and weldability is low. used for the parts bearing heavy load and friction, such as hot roller, reducer shaft, gears, tractor clutch gear, diesel engine connecting rod, bolts, heavy mining machinery of high strength and wear resistance of gear, oil film bearing sleeve and the middle elastic spring.
C | Si | Mn | S | P | Cr | Ni | Cu |
0.47~0.54 | 0.17~0.37 | 0.50~0.80 | Below 0.035 |
Below 0.035 |
0.80~1.10 | Below 0.030 | Below 0.030 |
Tensile strength σb (MPa) |
Yield Strength σs 0.2 (MPa) |
Elongation
δ 5 (%) |
reduction of crosssection area ψ (%) |
ballistic work Akv (J) |
pounding toughness value αkv (J/cm2) |
Hardness
(HB) |
specimen size |
Above 1080 | Above 930 | Above 9 |
Above 40 |
Above 39 |
Above 49 |
Below 229 | 25mm |
Copyright&Copy; 2002-2015 China JT Metal Group( Shanghai Jieteng Precision Mold Factory / Shanghai Jingteng Metal Group Co., Ltd. ). All Rights Reserved.
| Email: sales@sh-jieteng.com |
Old factory site: No.228 Sifeng Road, Songjiang district. Shanghai